FMI 32097:- Inspection of heater door screws for Giraffe OmniBed and Giraffe OmniBed Carestation Purpose:- Certain Giraffe OmniBed and Giraffe OmniBed Carestation may have defective heater doors due to improper torquing of heater door screws. FMI Type: Mandatory Recall FMI For code 2, 3, 4 and 5 closures, please reach out to FMI admin team at tcs.fmiadmins@gehealthcare.com or 8668836784 – OPT. 5 for assistance in closing and correct objective evidence attachment to Activity/SR.
Primary Delay43.0 days stuck in "Ready for Release"
⏱️
Total Delay20.7 business days over SLA thresholds
SLA vs Actual Time by Status
Actual (within SLA)
Actual (over SLA)
SLA Target
Entered
0.8d / 0.5d SLA
Ready for Release
43.0d
Scheduled
1.0d / 2.0d SLA
Tech On Site
0.0d / 1.0d SLA
Completed
0.0d / 1.0d SLA
Closed
3.0d / 1.0d SLA
Incomplete
0.5d
Ready to Bill
21.4d / 1.0d SLA
Billing Review
0.0d / 2.0d SLA
Invoice Pending
0.1d / 2.0d SLA
💬 Activities, Notes & Communications
🔒Internal CSA Notes
03/20/2026: ARoosa - Called 318-626-4300, Asked to xfer to biomed ended up at a recording stating thanks for calling GE health services and got caught in a loop with no good option to press... 02/16/2026 MHamersley - called 318-626-4300, operator said need to call: St Mary's @ 318-626-2800, this is OB/GYN clinic, they don't have any Giraffe OmniBed & Giraffe OmniBed Carestations; called 318-626-4300, phone rings then just disconnected, will try back another day
🔧Work Performed
Template Name: FMI32097_Code 1_inspect.
Template Description: FMI32097_Code 1_inspect.
Problem Found: FMI32097_Heater door inspection.
Action Taken: FMI 32097 completed.
Verification Test:
1. Verified the canopy moves smoothly.
2. Verified transition mode message is not present.
3. Verified doors close smoothly.
4. Verified corner pins are aligned.
5. Verified no alarms.
The device has passed all tests and is ready for customer use.
🔍Technician Findings
The screw was properly tightened, and no visible damage was observed on the heated door.
⚠️Problem Description
FMI 32097:- Inspection of heater door screws for Giraffe OmniBed and Giraffe OmniBed Carestation Purpose:- Certain Giraffe OmniBed and Giraffe OmniBed Carestation may have defective heater doors due to improper torquing of heater door screws. FMI Type: Mandatory Recall FMI For code 2, 3, 4 and 5 closures, please reach out to FMI admin team at tcs.fmiadmins@gehealthcare.com or 8668836784 – OPT. 5 for assistance in closing and correct objective evidence attachment to Activity/SR.
📄Description
GE Healthcare Giraffe OmniBed Carestation CS1
📞Call Description
FMI 32097
📅
WO-01341006 - FCO - DD: 4/27/2026 - - Giraffe OmniBed Carestation - SHREVEPORT - OCHSNER LSU ST MARY MEDICAL CENTER
Apr 1, 2026 8:00pm – 8:00pm
Work Order: WO-01341006
Account: GE Healthcare FMI
Customer Case Number: 1-556594376278
Location: OCHSNER LSU ST MARY MEDICAL CENTER
Address: 1 SAINT MARY PL, SHREVEPORT, LA 71101
Manufacturer: GE Healthcare
Model #: Giraffe OmniBed Carestation
Serial #: TAB24480087SA
Contact Name: TBD TBD
Contact P
JPG
TAB24480087SA SERIAL NUMBER
Apr 2, 2026
JPG
TAB24480087SA SCREW
Apr 2, 2026
PDF
TAB24480087SA COMPLETION REPORT
Apr 2, 2026
Timeline
📞
Case Linked Jan 30, 9:13 AM
Case Number:00563726
Subject:WO Creation Request - GE Healthcare FMI 32097
Status:Closed
📋
Work Order Created Jan 30, 12:24 PM
Work Order:WO-01341006
Type:FCO
Priority:PC
✅
Status: Ready for Release by Mandy NewmanJan 31, 12:06 PM